SALRK0212 – SEALXTREME® PLUS ACTIVE LEAK REPAIR KIT

SALRK0212 – SEALXTREME® PLUS ACTIVE LEAK REPAIR KIT

FEATURES:

  • Handy wrap repair system designed to fix offline leaks in 30 minutes
  • Provide permanent repair
  • Extend pipe life
  • No shutdown required
  • Applicable to any metal or non-metal pipes up to 18-inch diameter
  • Withstand pressure up to 400psi and temperature up to 200°C
  • Chemical resistance (acids, alkalis, solvents and etc)

APPLICATION:

  • Put on the gloves
  • Knead the SmartStic Underwater Epoxy until 80% harden
  • Place the 80% cure SmartStic Underwater Epoxy Stick beside the leak
  • Wrap the QuikControl Sealing tape on the
    SmartStic Underwater Epoxy Stick
  • Gravitate the QuikControl Sealing tape and push the SmartStic Underwater Epoxy Stick towards the leak
  • Continue wrapping the pipe with QuikControl Sealing tape until the leak stops
  • Dip the QuikControl Fiberglass Repair Tape in water for 5 seconds
  • Reinforce repair area with QuikControl Fiber glass Repair Tape
  • Polish the surface of QuikControl Fiberglass Repair Tape with water and rub in parallel direction with the pipe

Each Kit Contains:

  1. QuikControl Fiberglass Repair Tape
  2. QuikControl Sealing Tape
  3. SmartStic Underwater Epoxy Stick
  4. Protective Gloves

IMPA CODE:

KIT SIZES:

2” x 12’

KEY TECHNICAL DATA:

Application temperature 0°C to 65°C
Tensile strength 36,000 psi
Flexural strength 26,000 psi
Cured hardness 85 Shore D

SEALXTREME® Active Leak Repair Kit seals active pressurised leak under 30 minutes. It stops leaks on pipe without the requirement of system shut down. The maximum pressure Active Leak Repair Kit can seal is approximately 150 psi (10Bar) of live operating water pressure. This is a specially formulated wrap repair system that is durable and cost effective to seal pipe leaks with high industrial strength.