SNLRK 0206 – SEALXTREME® LEAK REPAIR KIT

SNLRK 0206 – SEALXTREME® LEAK REPAIR KIT

FEATURES:

  • Handy wrap repair system designed to fix offline leaks in 30 minutes
  • Provide permanent repair
  • Extend pipe life
  • Applicable to any metal or non-metal pipes up to 18-inch diameter
  • Withstand pressure up to 400psi and temperature up to 200°C
  • Chemical resistance (acids, alkalis, solvents and etc)

APPLICATION

  • Put on the gloves
  • Knead the SmartStic Underwater Epoxy until 80% harden
  • Place the 80% cure SmartStic Underwater Epoxy Stick on the leak
  • Dip the QuikControl Fiberglass Repair Tape in water for 5seconds
  • Reinforce repair area with QuikControl Fiberglass Repair Tape
  • Polish the surface of QuikControl Fiberglass Repair Tape with water and rub in parallel direction with the pipe

Each Kit Contains:

  1. QuikControl Fiberglass Repair Tape
  2. SmartStic Underwater Epoxy Stick
  3. Protective Gloves

IMPA CODE:

  • 812173

KIT SIZES:

2” x 6’

KEY TECHNICAL DATA:

Application temperature: 0°C to 65°C
Tensile strength: 24,000 psi
Flexural strength: 16,000 psi
Dielectic strength: 16,000 volts
Cured hardness: 85 Shore D

SEALXTREME® Leak Repair Kit seals leak found on pipe under 30 minutes when pipe medium is drained with no pressure. The maximum pressure Leak Repair Kit can seal is approximately 400psi (27 Bar) when the pipe medium is emptied and allowed to cure fully. This is a specially formulated wrap repair system that is durable and cost effective to seal pipe leaks with high industrial strength.