SEALXTREME Leak Repair Kit (SNLRK)

SEALXTREME® Leak Repair Kit seals leak found on the pipe under 30 minutes when pipe medium is drained with no pressure. The maximum post-cure pressure SEALXTREME Leak Repair Kit can withstand is approximately 2.76 MPa (400 psi / 27 bar). This is a specially formulated wrap repair kit that is durable and cost-effective to seal pipe leaks with high industrial strength.

Features:

  • Withstand pressure up to 2.76 MPa (400 psi / 27 bar) & temperature up to 120 °C (248 °F) post-curing
  • Fix leaks in less than 30 minutes
  • Hand-Applied
  • Works on both metal and non-metal pipes
  • Enhance chemical resistance
  • Repair & extend pipe life
  • Environmentally friendly & Reduce carbon footprint
SEALXTREME LEAK REPAIR KIT

PACKAGING INFORMATION

PRODUCT CODEPRODUCTIMPA CODE
SNLRK02062 inch x 6 feet812173
SNLRK03093 inch x 9 feet812174
SNLRK04124 inch x 12 feet812174

GUIDELINES FOR BEST PRACTICE

PIPE DIAMETERPIPE PRESSURE
0.35 MPa (50 psi)
PIPE PRESSURE
1.03 MPa (150 psi)
SIZEKIT SIZEQTYKIT SIZEQTY
15 mm½ inch2 inch x 6 feet12 inch x 6 feet1
20 mm¾ inch2 inch x 6 feet12 inch x 6 feet1
25 mm1 inch2 inch x 6 feet12 inch x 6 feet2
32 mm1¼ inch2 inch x 6 feet12 inch x 6 feet3
40 mm1½ inch2 inch x 6 feet22 inch x 6 feet3
50 mm2 inch3 inch x 9 feet13 inch x 9 feet1
65 mm2½ inch3 inch x 9 feet13 inch x 9 feet2
80 mm3 inch3 inch x 9 feet14 inch x 12 feet2
100 mm4 inch3 inch x 9 feet14 inch x 12 feet3
125 mm5 inch4 inch x 12 feet24 inch x 12 feet3
150 mm6 inch4 inch x 12 feet24 inch x 12 feet4
200 mm8 inch4 inch x 12 feet24 inch x 12 feet5
250 mm10 inch4 inch x 12 feet34 inch x 12 feet6
300 mm12 inch4 inch x 12 feet44 inch x 12 feet8
350 mm14 inch4 inch x 12 feet44 inch x 12 feet8
400 mm16 inch4 inch x 12 feet54 inch x 12 feet9
450 mm18 inch4 inch x 12 feet54 inch x 12 feet9
>450 mm>18 inchContact Us

TECHNICAL DATA

PARAMETERVALUE
Tensile Strength24,000 psi
Lap Shear Strength900 psi
Flexural Strength16,000 psi
Application Temperature0 °C to 65 °C
Dielectric Strength16,000 Volts
Hardness85 Shore D
Service temperature-50 °C to 120 °C
Design Pressure400 psi

HOW TO APPLY

  • Safety first, wear appropriate protective gear. Gloves are a must
  • Knead the epoxy stick until 80% harden
  • Use the 80% cure epoxy stick to seal the leak
  • Dip the fiberglass repair tape in water for 5 seconds
  • Reinforce repair area with fiberglass repair tape
  • Polish the surface of fiberglass repair tape with water and rub in parallel direction with the pipe
+ +