top of page
CHEMICAL INDUSTRY - RESEARCH DEVELOPMENT

KIT PERBAIKAN KEBOCORAN SEALXTREME

SEALXTREME Leak Repair Kit segel kebocoran ditemukan pada pipa di bawah 30 menit saat media pipa dikuras tanpa tekanan. Kit Perbaikan Kebocoran SEALXTREME pasca-penyembuhan maksimum yang dapat ditahan adalah sekitar 27 bar (400 psi). Ini adalah kit perbaikan bungkus yang diformulasikan khusus yang tahan lama dan hemat biaya untuk menutup kebocoran pipa dengan kekuatan industri yang tinggi.

 

membuat sayan Singapura

QUICK OVERVIEW OF COMPOSITE REPAIR SYSTEM

C-SMARTSEAL Solutions
Overview of Composite Repair System

FITUR
 

  • Tahan tekanan hingga 27 bar (400 psi) dan suhu hingga 120 °C (248 °F) setelah proses curing

  • Perbaiki kebocoran dalam waktu kurang dari 30 menit

  • Diterapkan dengan Tangan

  • Bekerja pada pipa logam dan non-logam

  • Meningkatkan ketahanan kimia

  • Perbaiki dan perpanjang umur pipa

  • Ramah lingkungan, Mengurangi jejak karbon

  • Repair odd-geometry shapes of flanges, reducers, manifolds, and pipe bends (elbow, tee)

  • Enhance chemical resistance

  • Eliminate expensive pipe replacement

  • Provides permanent solution

  • Environmentally friendly & Reduce carbon footprint

  • Applicable to both wet and dry surfaces

Feature

JENIS PRODUK

This versatile system is applicable to repair and reinforcement of pipes, tanks, vessels, and other complex geometry components (Flange, T-joint, Threaded fittings and more) in environments such as high pressure, temperature, steam, corrosive and wet-surfaces/under-water. Our unique solutions are developed as per international standards to protect, reinforce & repair your expensive systems.

Types of Composite Repair Systems

JENIS PRODUK

Offers permanent repair solutions addressing online (active) and offline leaks. In addition to this, the composite materials provide structural strengthening to extend service life of equipments and structures such as weakened pipes, tanks, and vessels.

Composite repair solution

STEAM LEAK REPAIR SYSTEM

Seals active high-temperature steam leak up to 280 °C. This is a specially formulated steam leak repair that conjoins carbon fiber and composite materials to form a durable and high strength repair system.

 

FLANGE LEAK REPAIR SYSTEM

Seals active leak from flange to flange joint. This is an engineered technique to seal leak via a durable and secure anchor method. It can be applied within the limited width of flanges.

 

PIPE THREAD LEAK REPAIR SYSTEM

Seals leak in pipe threads. The composite repair consists of unique range of products that provide complete protection of pipe threads.

JENIS PRODUK

 

This systematic method uses non-intrusive corrosion remediation and reinforcement solutions without causing any significant disruption. In industrial setups, wear and tear due to constant usage and harsh environmental factors can lead to significant corrosion. Corrosion repair system is customized to not only remediate existing wall loss but also to strengthen structures, thereby increasing their resistance against future damage. This provides a shift from a purely reactionary approach to a more proactive one, focusing on prevention as much as on remediation. Also, the equipment's ability to operate under these original conditions ensures consistency in production quality and reduces the likelihood of operational downtime.

Composite repair solution

JENIS PRODUK

In addition to other repair solutions, we offer preventive solutions for structures experiencing corrosive chemical environments, accelerated wear and tear, extreme weather conditions and other environmental factors due to location of installation such as splash zones, underwater and underground. Our ASME-compliant solution applies to both new and old structures. Most commonly used to reinforce structures against potential structural damages, operational failures and other breakdowns of critical structures due to various environmental factors.

Protection and Prevention
DATA TEKNIS
Parameter
Value
Service Pressure
138 bar (2000 psi)
Service temperature
-50 °C to 280 °C (-58 °F to 536 °F)
Dielectric Strength
16000 Volts
Application Temperature
0 °C to 120 °C (32 °F to 248 °F)
Flexural Strength
1310 bar (19000 psi)
Tensile Strength
1517 bar (22000 psi)

Technical data varies based on combination of products implemented.

Technical Data
DATA TEKNIS

SELF-HELP SELECTION GUIDE

This self-help guide is for quick reference only, actual requirements may vary.

Please consult our product specialists for no obligatory quote.

Repair Environment
Repair Substrate
Area of Application
Medium
Pressure
Temperature