QUIKCONTROL Wrapbind (QWB)
QUIKCONTROL® Wrapbind offers critical corrosion protection for pipelines / valves / bends and tee / flanges / tanks with by acting as a strong barrier against corrosion. This visco-elastic adhesive tape can bind onto irregular surfaces enabling it to be used almost anywhere. Wrapbind works instantly on application and is used on a repair or rehabilitation of existing pipelines / tanks for coating on aboveground or underground. It is suitable for use with oil & gas and water pipelines.
Wrapbind has self-healing ability against minor surface damages. This corrosion protection adhesive tape has resistance against soil stresses when it’s used with QUIKCONTROL WRAPCOVER (an external pipeline coating tape).
Features:
- Excellent resistance to corrosion
- Self-Adheres to most substrates & pipe coatings
- Plastic-elastic behaviour enables self-healing
- Impermeable to water and oxygen
- Quick application time
- No drying & hardening time
- Cold work method
- Long shelf-life
- Uniform thickness
- Weather resistance
- Suitable for steel pipelines & similar mechanical structures
- Applicable with QUIKCONTROL WRAPCOVER for soil stress resistance
PRODUCT INFORMATION
Parameter | Value |
---|---|
Colour | Yellow |
Thickness | >= 1.8 mm |
Length | 10 m |
Width | 150 mm |
Tape Material | Visco-Elastic Adhesive |
Tape carrier material | PE Film |
Shelf Life | 24 months at 24±2 °C |
TECHNICAL DATA
Technical Test(s) | Test Standard | Value |
---|---|---|
Peel Strength to steel (23 ºC) / (-45 ºC) | ASTM D1000 | >=5 N/cm |
Peel Strength to PE (23 ºC) | ASTM D1000 | >= 5 N/cm |
Shear Strength to Steel (23 ºC) / (-45 ºC) | EN 12068 | >= 0.02 MPa |
Dielectric strength | DIN 53481 | >= 10 kV/mm |
Cathodic Disbandment | EN 12068 | <= 20 mm-rad | =>
Water Absorption | ASTM D570 | < 0.03% |
Specific Insulation Resistance | EN 12068 | >= 10^8 ohm . m^2 |
Drip Resistance (3 days, 85 ºC) | No dripping | |
Heat aging (100 days, 90 ºC) | Coverage Rate >= 99% | |
Acid - Chemical Resistance (90 days, 10% HCL) | No Change | |
Base - Chemical Resistance (90 days, 10% NaOH) | No Change | |
Salt - Chemical Resistance (90 days, 3% NaCL) | No Change | |
Hot water submersion (120 days, 60 ºC) | No Change | |
Coverage Rate | >= 95% | |
Operational Temperature Range (±2 °C) | -45 °C to 80 °C | |
Coating Suitability | PE/ PP/ FBE/ PU/ Bitumen/ Steel |
QUIKCONTROL Wrapcover (QWC)
QUIKCONTROL® Wrapcover is used as a top-layer wrap to provide additional mechanical protection for pipelines / valves / bends and tee / flanges / tanks / below ground and in harsh environments. WRAPCOVER is made up of PolyEthylene(PE) film with strong butyl rubber adhesive for air-tight & water-tight bonding offering effective corrosion protection and soil stress resistance. This product works instantly on application. WRAPCOVER’s advantages include enhanced corrosion protection of visco-elastic pipe wraps, improved soil stress resistance, and better structural stability.
QUIKCONTROL WRAPCOVER is designed for use with our QUIKCONTROL WRAPBIND product for perfect compatibility. Suitable for use with oil & gas and water pipelines.
Features:
- Enhances chemical & mechanical protection
- Excellent adhesion and shear resistance
- Adheres to most substrates & pipe coatings strongly
- Highly conformable tape
- Wide application temperature range
- Impermeable to water and oxygen
- Quick application time
- No drying & hardening time
- Cold work method
- Long shelf-life
- Suitable for underground steel pipelines & similar mechanical structures
- Applicable with QUIKCONTROL WRAPBIND underlayer for soil stress resistance
PRODUCT INFORMATION
Parameter | Value |
---|---|
Colour | Black |
Thickness | 0.50 mm |
Length | 30 m |
Width | 150 mm |
Tape Material | PE Film |
Adhesive Type | Butyl Rubber Adhesive |
Shelf Life | 2 years at 24±2 °C |
TECHNICAL DATA
Name | Test method | Value |
---|---|---|
Tensile Strength | ASTM D1000 | 70 N/cm |
Elongation | ASTM D1000 | 340% |
Peel Adhesion to Primed Steel | ASTM D1000 | 30 N/cm |
Cathodic Disbandment | ASTM G8 | 6.4 mm |
Water Vapour Transmission Rate | ASTM F1249 | 0.2 g/m^2 |
Water Absorptivity | ASTM D570 | > 0.02% |
Volume Resistivity | ASTM D257 | 1.5 x 10^2 ohm . cm |
Dielectric Strength | ASTM D149 | 35 kV/mm |
Impact Resistance | EN 12068 | > 8 Nm |
Application Temperature Range | 5 °C to 50 °C | |
Operational Temperature Range | -30 °C to 85 °C | |
Chemical Resistance | Industrial Water, Acid, Alkali, Polar solvents, Salt |
ORDER QUIKCONTROL WRAPBIND via
+65 6747 8643
SALES@ALCHEMGLOBAL.COM
Online enquiry form
E-commerce stores – Eezee | Shopee | Lazada | Carousell